Boys’ Boxer Shorts — Cotton, Yarn-Dyed Stripe, Teen

How to choose

With children's underwear the label decides the purchase, not the price: tracking labels and third-party test reports are usually requested before the first order. Packs by size or by school year cut dead stock and simplify school programmes.

Boys’ Boxer Shorts — Cotton, Yarn-Dyed Stripe, Teen — catalogue reference UT-BE8039. Cloth, sizing and packing below come from the sample we already run for this article.

Unitex operates as a supply-chain manager rather than a factory. Based in Xiamen, Fujian Province, we develop the sample in-house, place production with audited partner workshops across the Xiamen–Quanzhou–Jinjiang knitwear corridor, and stay accountable for specification, inspection and shipment dates. We do not run our own production facility.

Fabric and construction

Yarn-dyed stripes are the honest version of a striped garment: the colour is in the yarn, so the line runs through the reverse of the cloth exactly as it does on the face, and no print registration can drift between lots. Here the stripe alternates a mid azure with a darker steel blue at equal width, roughly three to four millimetres apart. The waistband is where the style speaks, navy elastic woven with a repeating white CHILL OUT & line above a smaller NO PROBLEM, a two-line jacquard that reads as lettering rather than as a logo block. Cloth is a 95% cotton 5% spandex single jersey, fully stretching, with a matte face. Mid-length boxer cut.

UT-BE8039 — 95% cotton 5% spandex single jersey fully stretching

Construction highlights

UT-BE8039 — construction highlights

• Yarn dyed stripe fabric under super soften finishing treatment
• Yarn dye width up to 6cm per cycle
• Outer elastic 100% polyester or 100% nylon, customized jacquard logo available
• OEKO-TEX Standard 100 certified materials
• Eco-Friendly

Buyer questions on this style

What fabric does UT-BE8039 use? 95% cotton 5% spandex single jersey fully stretching.

Which sizes are available on UT-BE8039? 86/92-146/152 or as customer’s size specification.

What is the MOQ for UT-BE8039, and can I start smaller? 3,000 pcs per style and colour.

How is UT-BE8039 packed for retail? 1 piece per polybag or as per customer’s request.

How long do sampling and bulk take on UT-BE8039? Sampling 7–10 days; bulk 45–60 days, FOB Xiamen.

Why does a yarn-dyed stripe carry a higher minimum than a solid colour? Because the colour goes in before the cloth exists. The yarn is dyed to shade first and then knitted into the stripe sequence, so the minimum is set by the dye lot of each yarn colour rather than by the knitting run alone. A two-colour stripe therefore carries two lots, and a shade that has to sit between two others is harder to hit than a stand-alone solid. The advantage is durability: a yarn-dyed line runs through the reverse of the fabric, cannot drift out of register between lots, and does not fade the way a surface print would.

How do you keep the stripes aligned at the side seam? By cutting and matching at the seam rather than hoping the marker lines up. The stripe repeat is registered to the pattern piece so the line continues across the side seam within a tolerance we set at sampling, and the waistband is attached on the same register so the vertical join runs true up into the elastic. With a stripe this narrow, roughly three to four millimetres, a drift of a single millimetre shows, so we check it on the sewn sample and again at in-line inspection rather than only at the end of the run.

Customisation: working to the fabric you specify

We do not start from a single base cloth that everything has to fit. We work with the composition you name — 100% cotton, combed, semi-combed, cotton with elastane, polyester, nylon, modal, bamboo viscose, mesh and recycled polyester — and adjust pattern, needle, tension and finish to that material.

Colour is developed against an approved lab dip, and weight sits between 135 and 180 g/m² depending on composition and destination climate. Where you already have your own fabric or a nominated mill, we assess it before sampling to confirm it will take the print and the seam you have planned.

Export and packing data

UT-BE8039 — export and packing data

• HTS Code: 6107.11.00 00
• Weight Per Unit: 50 Grams
• Units Per Export Carton: As to required instruction
• Export Carton Dimensions L/W/H: As to required instruction
• Export Carton Weight: No more than 15KGS
• Size range: 86/92-146/152 (or to the customer’s own size chart)
• Retail packing: 1 piece per polybag

UT-BE8039 — already shipping to Eastern Europe, Western Europe, North America, Central/South America, Mid East/Africa, Asia, Australia.

UT-BE8039 — adjacent Boys’ Underwear styles, with QC and sampling behind them.

Specifications

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.