Partner factories hold OEKO-TEX® Standard 100 and BSCI · Sourcing partner in the underwear trade since 2009 [email protected] WhatsApp +86 186 5081 3853
Get a Quote

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.)

Seamless Underwear OEM | Seamless Panties Supplier

Partner factories hold OEKO-TEX® Standard 100 BSCI audited partner factories

Seamless Underwear OEM | Seamless Panties Supplier

Based in Xiamen, Fujian Province, in the Xiamen–Quanzhou–Jinjiang knitwear cluster of south-east China, Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) supplies seamless women’s underwear OEM programmes — laser-cut and bonded no-show styles in nylon-spandex — through BSCI-audited partner factories, with OEKO-TEX® Standard 100 certified materials and full private label service.

Seamless Styles We Supply

  • Laser-cut seamless briefs & hipsters — Raw-cut edges with bonded hems — invisible under leggings and fitted dresses.
  • Bonded seamless thongs — No-show thong cuts with cotton gussets for daily-wear programmes.
  • Seamless sports crossover — Seamless constructions that cross over into light activewear and sports bra programmes.

Sourcing Specifications

SizesXS–5XL, custom grading available
FabricsNylon-spandex and modal blends for seamless knitting; cotton gussets
Knit typeCircular-knit seamless or laser-cut bonded constructions, specified per style
MOQ2,000 pcs per style and colour
Sampling7–10 days for counter samples; 12–18 days for fully custom development
Bulk lead45–60 days after pre-production sample approval
ComplianceBSCI-audited partner factories; OEKO-TEX® Standard 100 certified materials
Trade termsFOB Xiamen (EXW Xiamen for Russia/CIS); CIF/DDP on request
Payment30% T/T deposit, 70% against copy of B/L; L/C at sight for larger programmes. On some programmes the balance — or the full value — is collected before shipment, where the payment route, the trade term (for example EXW) or an order value too small to carry a post-shipment balance puts the risk on the supplier rather than on the buyer’s market; the sequence that applies is stated on the quotation.

Machinery & Bonding: What Decides Seamless Quality

Seamless is a machinery-led category: Santoni-type circular knitting and bonding equipment decide the hand feel and edge durability. We confirm the partner factory’s machine park and bonding peel-strength tests before sampling, because delamination after repeated washing is the category’s classic failure.

Construction limits are part of the conversation up front: circular knitting fixes the maximum body width a machine gauge can produce, so very high-rise or extended sizes may need a bonded side seam instead of a fully seamless tube. We flag these pattern limits at quotation stage, not after sampling.

Hand feel versus durability is a real trade-off: higher spandex content gives a softer, closer fit but demands stricter bonding control. We agree the spandex ratio and bonding spec at the pre-production sample and hold them on every reorder.

Laser-cut edges are checked at finishing: edge wave and fraying are the two visible defects of the construction, and both trace back to cutting calibration and fabric spandex content rather than stitching.

Unitex runs its own liaison office in Jinjiang, on the ground inside the Fujian knitwear cluster, handling order follow-up, QC and factory audits. Related products & pages: Women’s Classic Sports Bra — Nylon/Spandex, Seamless · Women’s Sports Bra — Seamless, Comfort Fit · Full women’s underwear programme.

How a Seamless OEM Programme Runs

Send us your design or reference sample — we confirm the machine park and bonding peel-strength tests before sampling, then coordinate development and bulk production with the partner factories, with AQL 2.5 inline QC inspection on every order. Request a quote →

For the plus-size grading and test figures — Plus-Size Seamless Underwear (up to 4XL): What to Verify Before You Order.

· Xiamen Unitex Trade Co., Ltd. — OEM & ODM underwear sourcing partner

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.
Supplier Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — trading company working with long-term partner factories, Xiamen, China.
Sizes XS–5XL, custom grading available
Fabrics Nylon-spandex and modal blends for seamless knitting; cotton gussets
Knit type Circular-knit seamless or laser-cut bonded, specified per style
Spandex ratio Agreed at the pre-production sample and held on every reorder
Bonding QC Peel-strength and wash-durability tests before bulk
MOQ women's seamless underwear 2,000 pcs per style and colour
Sampling 7–10 days counter samples; 12–18 days fully custom development
Bulk lead 45–60 days after pre-production sample approval
Compliance BSCI-audited partner factories; OEKO-TEX Standard 100 certified materials
Quality control AQL 2.5 inline inspection; SGS / Intertek / TÜV third-party inspection on request
Trade terms FOB Xiamen (EXW Xiamen for Russia/CIS); CIF/DDP on request
Payment 30% T/T deposit, 70% against copy of B/L; L/C at sight for larger programmes. On some programmes the balance — or the full value — is collected before shipment, where the payment route, the trade term (for example EXW) or an order value too small to carry a post-shipment balance puts the risk on the supplier rather than on the buyer's market; the sequence that applies is stated on the quotation.

Buyer checklist

  • Confirm the machine park first: seamless hand feel and edge durability are set by the circular knitting gauge, not by the fabric alone.
  • Ask for bonding peel-strength results, not just a flat fabric swatch.
  • Wash-test the pre-production sample several cycles, because delamination only appears after repeated washing.
  • Agree the spandex ratio in writing at the pre-production sample, since it trades hand feel against bonding control.
  • Inspect laser-cut edges for wave and fraying at finishing, where the defects actually show.
  • Check that sizes the gauge cannot knit as a single tube have been quoted with a bonded side seam.

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.)

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.

Sources & references

  1. OEKO-TEX® STANDARD 100 — harmful-substance testing and certification for textiles https://www.oeko-tex.com/en/our-standards/oeko-tex-standard-100
  2. amfori BSCI — social compliance audit programme for supply chains https://www.amfori.org/amfori-bsci
  3. ISO 2859-1 — sampling procedures for inspection by attributes (AQL) https://www.iso.org/standard/2859-1
  4. ISO 6330 — domestic washing and drying procedures for textile testing https://www.iso.org/standard/75934.html
  5. ISO 3758 — textiles: care labelling code using symbols https://www.iso.org/standard/74401.html
  6. Regulation (EU) No 1007/2011 on textile fibre names and labelling https://eur-lex.europa.eu/eli/reg/2011/1007/oj
  7. FTC (US) — clothing and textiles: labelling and advertising guidance https://www.ftc.gov/business-guidance/industry/clothing-and-textiles
  8. CPSIA (US) — consumer product safety improvement act, children's products https://www.cpsc.gov/Regulations-Laws--Standards/Statutes/The-Consumer-Product-Safety-Improvement-Act

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.

Buyer Questions

MOQ, lead times, certification and trading terms

Unitex Underwear works to 2,000 pcs per style and per colour for seamless programmes, because circular knitting and bonding machine time has to be booked in advance.

Yes. Unitex Underwear returns counter samples in 7–10 days, and a fully custom seamless development — knit structure plus bonding pattern — takes 12–18 days.

Partly. A circular knitting gauge fixes the maximum body width it can produce, so Unitex Underwear quotes those styles with a bonded side seam instead of a fully seamless tube, and flags the limit at quotation stage.

Bonded seams go through peel-strength and wash-durability tests before bulk, and Unitex Underwear welcomes SGS, Intertek or TÜV inspection on any order.

The spandex ratio and the bonding spec. Higher spandex gives a softer, closer fit but demands stricter bonding control, so Unitex Underwear agrees both at the pre-production sample and holds them on every reorder.

Heat-transfer or print is the usual answer, because a woven label is sewn in and a sewn seam is what a seamless brief is built to avoid. Branding on a seamless style is normally applied as a heat-transfer to the inside back, a print on the waistband, or a bonded patch, and the placement is settled on the sample rather than from a layout. A woven label is still possible where the style has a genuine seam position to carry it, such as a side-seam hipster with a bonded waistband, but it is a deliberate choice rather than a default. Tell us which you want at sampling stage, because the waistband construction has to allow for it. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).