Men’s Boxer Shorts OEM | Custom Woven Boxers Wholesale

Page 6 of 6 — showing products 121–135 of 135 in this category.

Men’s Boxer Shorts OEM | Custom Woven Boxers Wholesale

Unitex supplies men’s woven boxer shorts — cotton poplin, yarn-dyed checks, prints and brushed flannel — produced at audited partner factories in the Xiamen–Quanzhou–Jinjiang textile cluster in Fujian. Those partner factories hold amfori BSCI and OEKO-TEX Standard 100 certification, and fabrics are certified to Standard 100 Class II, the class that covers direct skin contact. Xiamen Unitex Trade Co., Ltd. is a sourcing and trading company: we develop the specification, place production with partner factories, control quality and prepare export documents, and we do not own manufacturing facilities. Unitex has been in the trade since 2009, was incorporated in Xiamen in 2013, and the partner network carries capacity of around 600,000 pieces a month.

Woven boxer and knit boxer are two different supply chains

Both are sold as “boxers”, and buyers routinely quote them as one line. They are not one line. A woven boxer starts at a weaving mill and is then cut and sewn; a knit boxer starts on a circular knitting machine and is largely tubular. The fabric source changes what the minimum really is, and it changes where the delay sits in the calendar.

Route	Fabric source	What actually sets the minimum	Where the delay sits
Woven poplin, solid	Weaving mill, piece-dyed	Sewing line and the fabric’s dye lot	Fabric is usually stock, so sampling runs 7–10 days
Woven poplin, yarn-dyed check	Weaving mill, yarn dyed before weaving	The mill’s minimum per colourway — each check is its own dye lot	Weaving and dyeing come first; this is the long pole
Printed boxer	Greige or dyed base, printed after	Sewing line; print has its own minimum per design	Strike-off approval, then print
Brushed flannel	Woven, then brushed on one or both faces	Sewing line plus the brushing batch	Brushing is a separate pass after dyeing
Knit boxer	Circular knit, tubular	Knitting lot and colour	Knitting and dyeing, then cut and sewn finishing

The check is a dye lot, not a print file

A yarn-dyed check is woven from coloured yarns, so the pattern exists in the cloth rather than on top of it. Three consequences follow, and all three land on the purchase order.

• Each check is a separate colourway. The minimum is counted per style and colour, so a range of four checks is four minimums — not one style in four looks.
• Matching is a cutting property. A check that is a few millimetres out at the side seam is visible in a way a solid colour never is, so the marker plan and the seam allowance have to be agreed before cutting, not corrected in finishing.
• Repeats have to be reserved. A check reordered six months later may come from a different dye lot; if the shade has to match an earlier shipment, that has to be written into the order.

A printed check escapes the dye-lot problem and is cheaper at short runs, but it moves the risk to the print: registration across panels, and a colour that sits on the surface rather than in the yarn. Which one is right depends on whether you are building a carry-over programme or a seasonal print story — not on which price looks lower in a single quotation.

Flannel is a raised surface, and that changes the US test position

16 CFR 1610 applies to clothing textiles, adult and children’s alike, and it is judged on burn time. Plain-surface fabrics weighing 2.6 oz/yd² (about 88 g/m²) or more are exempt from the testing obligation under § 1610.1(d) when an initial guaranty is issued — and a poplin at roughly 120–140 g/m² (3.5–4.1 oz/yd²) clears that comfortably, which is why a plain cotton boxer usually ships without a flammability report.

Brushed flannel gets none of that. The exemption covers plain surfaces only, so a raised-surface fabric is a tested article at any weight, and it is judged on the raised-surface scale: Class 1 requires more than 7.0 seconds, Class 2 is 4.0–7.0 seconds with base burn, and anything under 4.0 seconds with base burn is Class 3, which may not be used for clothing. A mill’s poplin report therefore does not cover your flannel. If a winter range is built on flannel, budget the test as a separate line and request it on the brushed face, because that is the surface the standard is measuring.

Shrinkage decides whether the boxer still fits after ten washes

Woven cotton moves more than knitted cotton, and it moves differently in the two directions: warp and weft are separate numbers, and a report that gives a single figure is not telling you enough. Dimensional change is measured to ISO 6330 and care symbols follow ISO 3758, but neither sets a pass limit — the tolerance is contractual, which is why it belongs in the purchase order as an agreed number rather than in a marketing claim.

Two things protect the fit. First, ask whether the poplin is pre-shrunk before cutting; an untreated poplin can move several percent in the warp after the first home wash, while a pre-shrunk cloth is specified to hold much closer. Second, ask for the report on the actual shell fabric you are buying, not on the mill’s general poplin — the finishing route decides the number, and two poplins with the same construction can behave differently. Waistband elastic should be tested alongside the shell, because a band that shrinks at a different rate from the body is what produces the twisted waist you see on returned garments.

Fly, button and waistband: the operations that add days

The fly is where a woven boxer separates itself from a knit one on the cost sheet. A button fly adds a placket, a buttonhole operation and a button attach, each with its own quality point; an open fly removes the button but keeps the placket; a no-fly boxer is the cheapest and the least common in Western retail. Button attachment strength is a production control item rather than a legal one — there is no statutory pull-test value for adult apparel — so it belongs in your inspection plan as an agreed figure, not in a compliance claim.

The waistband deserves its own conversation, and we have written it separately: band width, stretch and recovery, post-wash shrinkage against the shell, and colour fastness of the band against the fabric. What to specify on a men’s waistband → The one rule that applies to every band: approve it as sewn, not as supplied, because a band that measures correctly on the bench can still pucker once it is in the seam.

Grading S–5XL: where the block has to break

A boxer range quoted as S–5XL is not one grade running end to end. Past the 2XL step the seat curve and the leg opening usually need a block change rather than a further grade increment, and the waistband has to be re-specified because elastic that recovers correctly at 85 cm does not automatically do so at 115 cm. The practical test is to fit two sizes per block — one at the top of the range and one just below the break — rather than one representative size, because the break is exactly where a range fails.

Sizing conventions differ by market as well: a US L, an EU L and a UK L are three different measurements on a woven boxer, and a range sold into two markets needs either two charts or one chart with both columns. That decision belongs in the brief, because it changes the number of grade rules and therefore the sample rounds.

Packing and the packaging file

Woven boxers sell as singles, as two- and three-piece packs, and as gift boxes, and the pack format is a labour line rather than a detail: a printed belly band needs its own artwork approval, a gift box needs a carton test, and a hanger changes the carton count. In the EU the packaging is now a regulatory subject as well — the Packaging and Packaging Waste Regulation reaches the bag and the carton, not only the garment — and our PPWR guide sets out what that means for an underwear pack. Fibre content and care labelling follow Regulation (EU) 1007/2011 in Europe and the FTC textile rules plus 16 CFR 423 in the United States.

Where the delay actually sits in a woven programme

On a knit programme the calendar is set by sampling. On a woven programme it is set by the cloth. Sampling runs 7–10 days where the fabric is in stock and up to around 30 days where the fabric has to be developed; a full development sample runs 12–18 days and the pre-production sample 5–7 days after approval. Bulk is 45–60 days for a new order and 30–40 days for a repeat. Where a yarn-dyed check or a brushed flannel is new, the mill’s weaving and dyeing sit in front of all of it, and no amount of pressure on the sewing line recovers that time.

Stage	Duration	What it gates
Fabric position check	Before quoting	Whether sampling is 7–10 days or up to 30
Mill weaving and dyeing (new check or flannel)	Ahead of sampling	Everything downstream
Development sample	12–18 days per round	Fit, fly and waistband approval
Pre-production sample	5–7 days after approval	The cutting date
Bulk production	45–60 days new, 30–40 repeat	Vessel booking
Inspection	AQL 2.5 to ISO 2859-1	Release; third-party inspection available before shipment

Where this page stops and the guides start

This page covers the woven boxer route, the fabric decisions behind it and the order mechanics. For the wider men’s programme — boxer briefs and briefs alongside boxers — the guide is here: Men’s underwear OEM guide: boxer briefs and briefs manufacturing → If you are still choosing between the three silhouettes, the difference between boxers, briefs and boxer briefs is the place to start.

For the knitted side of the range, 4-needle 6-thread boxer briefs covers the seam specification and its 3,000-piece minimum. Before a first order, the twelve checks in our supplier verification checklist are the ones that surface problems early, and cotton men’s adult boxer styles can be evaluated through our salesman sample programme before any bulk commitment. To start a specification, send us the styles, size range and destination market.

Men’s Boxer Shorts Specifications

Parameter	Details
Fabrics	Cotton poplin, yarn-dyed check, brushed cotton flannel, cotton-spandex jersey, modal
Fabric weight	Poplin 120–140 g/m²; brushed flannel 150–180 g/m²
Sizes	S–5XL, US / EU / UK charts, with a block change at the 2XL step
Fly	Button fly, open fly or no fly
Waistband	Custom jacquard elastic with your logo; band width and stretch specified separately
MOQ	2,000 pcs per style and colour; each check counts as a colour
Sampling	7–10 days on stock fabric; up to 30 days where the fabric is developed; PPS 5–7 days
Bulk lead time	45–60 days for new orders; 30–40 days for repeats
Capacity	~600,000 pcs/month across the partner network
Chemical standard	OEKO-TEX Standard 100 Class II, direct skin contact
Inspection	AQL 2.5 to ISO 2859-1; third-party inspection available
Trade terms	FOB Xiamen; 30% deposit, 70% against copy of B/L; quotation valid 30 days

Last updated: 2026-11-03 · Xiamen Unitex Trade Co., Ltd. — OEM & ODM underwear sourcing partner

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.