Boys’ Soft Thong Briefs — 3-Piece Pack, Cotton, Custom Print
Boys' Soft Thong Briefs — 3-Piece Pack, Cotton, Custom Print — OEM & private label, cotton, boys' underwear, 2,000 pcs per style and colour.

Boys’ Thong — Cotton, Custom Print
Boys' Thong — Cotton, Custom Print — OEM & private label, cotton, boys' underwear, 2,000 pcs per style and colour.

Boys’ Thong Briefs — 3-Piece Pack, Cotton, Custom Print
Boys' Thong Briefs — 3-Piece Pack, Cotton, Custom Print — OEM & private label, cotton, boys' underwear, 2,000 pcs per style and colour.

Boys’ Thong Briefs — Cotton, Custom Print
Boys' Thong Briefs — Cotton, Custom Print — OEM & private label, cotton, boys' underwear, 2,000 pcs per style and colour.

Kids’ Thong — 3-Piece Pack, Cotton, Custom Print
Kids' Thong — 3-Piece Pack, Cotton, Custom Print — OEM & private label, cotton, boys' underwear, 2,000 pcs per style and colour.

Kids’ Thong — 3-Piece Pack, Cotton, Custom Print — Comfort Fit
Kids' Thong — 3-Piece Pack, Cotton, Custom Print — Comfort Fit — OEM & private label, cotton, boys' underwear, 2,000 pcs per style and colour.

Page 2 of 2 — showing products 25–30 of 30 in this category.
Boys’ Briefs OEM | Kids Briefs Supplier China
Based in Xiamen, Fujian Province, in the Xiamen–Quanzhou–Jinjiang knitwear cluster of south-east China, Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) is a boys’ briefs OEM/ODM sourcing partner — kids’ briefs in soft combed cotton with custom prints and licensed artwork — produced through BSCI-audited partner factories with OEKO-TEX® Standard 100 certified materials and CPSIA-compliant documentation support.
Boys’ Styles We Supply
- Classic boys’ briefs — Y-front and support-pouch briefs in soft combed cotton with tagless labels.
- Printed & licensed briefs — All-over prints, character artwork and multipack programmes.
- Comfort-fit variants — Covered elastic waistbands and flatlock seams for sensitive skin.
Sourcing Specifications
| Sizes | 2–16 years (age-graded), custom size charts on request |
|---|---|
| Fabrics | Combed cotton, cotton-spandex; OEKO-TEX Standard 100 Class II for skin contact; Class I options for baby sizes up to 36 months |
| Documentation | CPSIA / EU GPSR order-file documentation built in from order stage |
| MOQ | 3,600 pcs per style and colour |
| Sampling | 7–10 days for counter samples; 12–18 days for fully custom development |
| Bulk lead | 45–60 days after pre-production sample approval |
| Compliance | BSCI-audited partner factories; OEKO-TEX® Standard 100 certified materials |
| Trade terms | FOB Xiamen (EXW Xiamen for Russia/CIS); CIF/DDP on request |
| Payment | 30% T/T deposit, 70% against copy of B/L; L/C at sight for larger programmes. On some programmes the balance — or the full value — is collected before shipment, where the payment route, the trade term (for example EXW) or an order value too small to carry a post-shipment balance puts the risk on the supplier rather than on the buyer’s market; the sequence that applies is stated on the quotation. |
Kids’ Compliance: Construction & Documentation
Kids’ briefs are a compliance-first category: drawstring-free construction, secure trims and children’s product documentation matter as much as comfort. We build CPSIA / EU GPSR documentation into the order file from the start. For the full product list, see the boys’ briefs catalogue page below.
Construction rules for the age group: no drawstrings anywhere on the garment, trims and appliqués pull-tested, covered elastics and flatlock seams against sensitive skin, and tagless labels as standard.
Licensed and character artwork goes through the same strike-off approval as adult print lines, so colours and placement are signed off on the actual pattern before bulk cutting.
Size labelling follows your market: age-based and height-based size charts are both supported, and the size break is agreed before grading starts.
Unitex runs its own liaison office in Jinjiang, on the ground inside the Fujian knitwear cluster, handling order follow-up, QC and factory audits. Related products & pages: Boys’ briefs product catalogue · Boys’ Basic Briefs — 3-Piece Pack, Custom Print · Boys’ Basic Briefs — 3-Piece Pack, Custom Print #2 · Boys’ Basic Briefs — Custom Print #3 · All boys’ underwear styles.
How a Boys’ Briefs OEM Programme Runs
Send us your artwork or spec sheet — our team coordinates compliance documentation, fabric sourcing, sampling and bulk production with the partner factories, with AQL 2.5 inline QC inspection on every order. Request a quote →
What to measure on a kids’ brief
Children’s briefs are bought on comfort and returned on fit, and the returns concentrate in three measurements. They belong on the order record, with a tolerance, because a size table alone does not tell an inspector what to put the tape against.
| Point | How it is measured | Why it decides a return |
|---|---|---|
| Waistband at rest and extended | Flat width at rest, then extended to the stated figure, then recovery after repeated extension | A band that is tight enough to stay up on the smallest size is too tight on the largest, and vice versa |
| Leg opening | Around the opening, unstretched, on every size in the ratio | A binding that cuts in is the most common fit complaint in this age group |
| Rise, front and back | Waist seam to crotch seam, the two figures recorded separately | Children change shape faster than they change size, and a single rise figure hides that |
| Label position | Distance from the back waist seam to the label edge, and the finished label height | A label that sits high rubs on the spine; a stiff one is noticed immediately |
The growth allowance should be stated separately from the garment measurement. A buyer asking for room to grow needs a documented change to the pattern, not an unrecorded one on the cutting table — otherwise the next order reproduces neither the old fit nor the new one.
Tagless labels: the failure that comes back as a return
A tagless label is a printing or transfer decision, not a labelling decision, and it fails in a way that is invisible at inspection. The adhesion has to survive the wash programme the care label instructs, so the label test and the care label test are the same test: run the garment through the ISO 6330 procedure the label describes, then check the edges of the transfer rather than the centre.
Three points to write into the order: the transfer type and its carrier, the position measured from the back waist seam, and the adhesion check after the stated number of wash cycles. A lifting corner is the first thing a parent notices and the last thing an inspector looks for, which is why it has to be a named check rather than an impression.
Print, colour and the school-uniform programme
Two programme types dominate this category and they need different specifications. A licensed or character print programme is judged on colour fidelity against a strike-off approved on the actual pattern, because registration drift on a small garment is more visible than on an adult one. A school-uniform programme is judged on colour retention instead: white and navy briefs are washed often and at whatever temperature the household uses, so colour fastness to washing to ISO 105-C06 belongs in the specification, and the care label has to instruct a condition the fabric was actually tested to.
Print and colour sit next to the compliance questions, and those are covered in more depth on the boys’ underwear hub rather than repeated here. Where the range includes a woven boxer as well, the pattern and inspection differences are set out on the boys’ woven boxer page.
Where a kids’ brief fails inspection
The sampling plan and the AQL come from the purchase order, with ISO 2859-1 behind almost every garment AQL clause. On this product the defects concentrate in five places.
- Leg binding tension differing between sizes in the same ratio, so one size cuts in while another gapes.
- Label adhesion at the corners of a tagless transfer, checked after the wash programme rather than before it.
- Print registration drifting at the side seam or the leg opening, where the panel curves away from the screen.
- Size marking that does not match the measurement, which is the defect a retailer discovers only after the goods are on the shelf.
- Waistband twist after washing, and shade variation between cartons of the same colour.
None of the five is visible on a folded garment in a carton. All five are cheap to check at first article and expensive to discover in a warehouse.
· Xiamen Unitex Trade Co., Ltd. — OEM & ODM underwear sourcing partner
| Supplier | Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — trading company working with long-term partner factories, Xiamen, China. |
|---|---|
| Minimum order | 3,600 pieces per style and colour |
| Sizing basis | Height, not age; destination market size table with stated limits and tolerances |
| Fabrics | Combed cotton and cotton/elastane, with skin-contact points reviewed |
| Construction rules | No drawstrings at neck or waist; small components resist pull-off force |
| Labelling | Composition, care symbols and market-specific age marking |
| Lead time | Counter sample 7-10 days; bulk 45-60 days from approval and deposit |
| Waistband measurement | Flat width at rest, extended width and recovery, all three on the order record |
| Label position | Distance from the back waist seam to the label edge, plus finished label height |
| Label adhesion | Checked after the ISO 6330 wash programme the care label instructs |
| Print approval | Strike-off approved on the actual pattern before bulk cutting |
| Colour fastness | ISO 105-C06 to washing, for school-uniform and multipack programmes |
Buyer checklist
- Size table built on height with the destination limits and tolerances
- Each size break calculated independently, not scaled from the middle
- Drawstring and small-part rules checked on the pre-production sample
- Label position and finish reviewed for skin contact
- Material certificate confirmed to cover the children product class
- Age marking requirement confirmed for the destination market
- Extreme sizes validated on the body before the bulk run
- Label adhesion checked at the corners after the wash programme, not at the centre before it.
Unitex Underwear (Xiamen Unitex Trade Co., Ltd.)
Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.
