Men’s Bikini Briefs — Cotton, Yarn-Dyed Stripe
Men's Bikini Briefs — Cotton, Yarn-Dyed Stripe — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Briefs — Cotton, Yarn-Dyed Stripe
Men's Briefs — Cotton, Yarn-Dyed Stripe — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Briefs — Cotton, Yarn-Dyed Stripe — fashional
Men's Briefs — Cotton, Yarn-Dyed Stripe — Fashionable — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Briefs — Cotton, Yarn-Dyed Stripe — mature
Men's Briefs — Cotton, Yarn-Dyed Stripe — Mature Men — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Briefs — Cotton, Yarn-Dyed Stripe, Breathable
Men's Briefs — Cotton, Yarn-Dyed Stripe, Breathable — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Classic Briefs — Cotton
Men's Classic Briefs — Cotton — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Classic Briefs — Cotton — Youth Range
Men's Classic Briefs — Cotton — Youth Range — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Classic Briefs — Cotton/Spandex
Men's Classic Briefs — Cotton/Spandex — OEM & private label, cotton/spandex, men's underwear, 2,000 pcs per style and colour.

Men’s Classic Underwear — Cotton, Comfort Fit
Men's Classic Underwear — Cotton, Comfort Fit — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Classic Underwear — Cotton, Solid Colour
Men's Classic Underwear — Cotton, Solid Colour — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Soft Briefs — Cotton/Spandex
Men's Soft Briefs — Cotton/Spandex — OEM & private label, cotton/spandex, men's underwear, 2,000 pcs per style and colour.

Men’s Soft Underwear — Cotton, Yarn-Dyed Stripe
Men's Soft Underwear — Cotton, Yarn-Dyed Stripe — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Underwear — Cotton, Jacquard Elastic, Yarn-Dyed Stripe
Men's Underwear — Cotton, Jacquard Elastic, Yarn-Dyed Stripe — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Underwear — Cotton, Yarn-Dyed Stripe
Men's Underwear — Cotton, Yarn-Dyed Stripe — OEM & private label, cotton, men's underwear, 2,000 pcs per style and colour.

Men’s Underwear — Cotton/Spandex, Yarn-Dyed Stripe
Men's Underwear — Cotton/Spandex, Yarn-Dyed Stripe — OEM & private label, cotton/spandex, men's underwear, 2,000 pcs per style and colour.

Men’s Briefs OEM | Brief Underwear Supplier China
Based in Xiamen, Fujian Province, in the Xiamen–Quanzhou–Jinjiang knitwear cluster of south-east China, Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) is a men’s briefs OEM/ODM sourcing partner in China — classic and bikini-cut briefs in combed cotton, yarn-dyed stripes and custom waistbands — produced through BSCI-audited partner factories with OEKO-TEX® Standard 100 certified materials, MOQ 2,000 pcs per style and colour, FOB Xiamen.
Brief Styles We Supply
- Classic briefs — Traditional full-cut briefs in combed cotton — the volume staple for multi-markets.
- Bikini & sport briefs — Lower-rise bikini cuts and sport briefs with support pouches.
- Yarn-dyed stripe programmes — Yarn-dyed stripes and jacquard waistbands for premium private label lines.
Sourcing Specifications
| Sizes | S–5XL (EU/US sizing), custom grading available |
|---|---|
| Fabrics | Combed cotton, cotton-spandex, modal; yarn-dyed options |
| Pouch & binding | Pouch depth and binding width recorded on the measurement chart of every order |
| MOQ | 2,000 pcs per style and colour |
| Sampling | 7–10 days for counter samples; 12–18 days for fully custom development |
| Bulk lead | 45–60 days after pre-production sample approval |
| Compliance | BSCI-audited partner factories; OEKO-TEX® Standard 100 certified materials |
| Trade terms | FOB Xiamen (EXW Xiamen for Russia/CIS); CIF/DDP on request |
| Payment | 30% T/T deposit, 70% against copy of B/L; L/C at sight for larger programmes. On some programmes the balance — or the full value — is collected before shipment, where the payment route, the trade term (for example EXW) or an order value too small to carry a post-shipment balance puts the risk on the supplier rather than on the buyer’s market; the sequence that applies is stated on the quotation. |
Pouch Fit & Binding Finish
Briefs are the oldest cut in the category and the least forgiving on pouch fit and binding finish. We keep binding width and pouch depth on the measurement chart of every order, and AQL 2.5 final inspection is standard on every lot. For the full product list, see the men’s briefs catalogue page linked below.
Front construction is a line decision: classic Y-front, contoured pouch or bikini-cut front each sit on different blocks, and we agree the construction at brief stage because it changes both the pattern and the binding route.
Leg opening curves are cut to lie flat without digging in — binding tension is what makes the difference, and it is one of the measurements we hold from approved sample to bulk.
Unitex runs its own liaison office in Jinjiang, on the ground inside the Fujian knitwear cluster, handling order follow-up, QC and factory audits. Related products & pages: Men’s briefs product catalogue · Men’s Classic Briefs — Cotton · Men’s Briefs — Cotton, Yarn-Dyed Stripe · Men’s Bikini Briefs — Cotton, Yarn-Dyed Stripe.
How a Brief OEM Programme Runs
Send us your spec sheet or reference sample — our team coordinates pattern making, binding and fabric sourcing, sampling and bulk production with the partner factories, with pouch depth and binding width on the measurement chart of every order and AQL 2.5 final inspection on every lot. Request a quote →
Brief construction: the four points that decide the garment
In a brief there is no leg length to hide a construction error, so everything rests on four decisions. Get them right and the brief is the cheapest garment in the range to make well; get them wrong and no fabric upgrade will save it.
| Point | What to specify | What happens if it is left vague |
|---|---|---|
| Pouch construction | Two-piece or single-piece, seam position, and the rise of the front panel | Either restriction or a loose front that loses shape after washing |
| Binding / edge finish | Binding width, elastic tension at the leg opening, stitch type | Cutting in at the leg, or a rolled edge after three washes |
| Rise | Low, mid or high — written in centimetres, not as a word | The same word means different heights between suppliers |
| Waistband height and stretch | Height in mm, stretch ratio, and logo method | Folding over at the top, most visible on larger sizes |
One pattern note worth carrying into the price conversation: the brief uses less fabric than a boxer brief, so the fabric line is a smaller share of cost and the labour-and-trim share is larger. That is why briefs respond less to a fabric upgrade than boxer briefs do.
For the band specification, see jacquard waistband with your custom logo; for the fabric line, MicroModal boxer briefs for hot climates; and for the category overview, men’s underwear OEM.
How the four points are measured on a brief
A brief is specified in words and inspected in millimetres, which is where most disputes start. The table below is the measurement sheet we put on the order record, so that the second order can be checked against the first rather than against a memory of it.
| Point | How it is measured | What the tolerance is set against |
|---|---|---|
| Pouch depth | Garment laid flat, from the waist seam to the lowest point of the front panel | The approved counter sample, to a stated millimetre tolerance |
| Binding width | Finished width of the binding at the leg opening, measured at three points around the curve | The order record, to a stated millimetre tolerance |
| Leg opening | Measured around the opening, unstretched, on every size in the ratio | The size table, not the sample |
| Rise | Front rise and back rise recorded separately, waist seam to crotch seam | The size table, with the two figures never merged into one |
| Waistband height | Finished height measured at the side seam | The order record, in millimetres rather than as a style name |
| Waistband stretch | Width at rest, width extended to the stated figure, and recovery after repeated extension | The order record, with the ratio written out |
Two of these carry more weight than they appear to. Binding tension is the single variable that decides whether a leg opening lies flat or cuts in, so it belongs in the order record and it should not change between the sample and the bulk run. And rise has to be split into front and back: a single rise figure lets a supplier move the waistband without changing the number on the sheet, which is exactly the drift a reorder cannot detect.
Fabric weight, shrinkage and colour: the three tests a brief needs
A brief uses less fabric than a boxer brief, so the fabric line is a smaller share of the cost — but the tests still apply, and they are cheaper than a claim. Each of the four below is a document rather than an opinion.
- Fabric weight to ISO 3801, measured by cutting a known area from the roll, not from a swatch the mill chose.
- Dimensional change to ISO 6330 and ISO 5077, run on the finished brief as well as on the roll, because the waistband and the binding add shrinkage the fabric never showed.
- Colour fastness to washing to ISO 105-C06 and to perspiration to ISO 105-E04. Perspiration is the one that matters more on a brief than light fastness, because the garment sits against skin under load rather than in a window.
- Elastic recovery of the waistband, recorded as a percentage of the original width after repeated extension, rather than as a pass or fail by eye.
The pass thresholds for all four are commercial and belong in the specification. What is not commercial is the method: a shrinkage figure without ISO 6330 and ISO 5077 behind it cannot be compared with another supplier’s figure, which makes it useless for choosing between two quotations.
Where a brief fails final inspection
The sampling plan and the AQL come from the purchase order, with ISO 2859-1 as the standard behind almost every garment AQL clause. What follows is where the defects concentrate on this cut, so the inspector’s time goes to the right places.
- Leg opening cutting in or gaping on one size in the ratio, which is a binding tension or pattern fault rather than a sewing fault.
- Pouch asymmetry, where the front seam sits off centre — visible only when the garment is laid flat and squared, not when it is held up.
- Waistband twist after washing, which comes from the elastic or from how it was attached, and which appears in the market rather than on the table.
- Needle lines and dropped stitches in the knit, which become holes after a few washes.
- Shade variation between cartons of the same colour, a dye-lot question that a cutting plan has to anticipate.
· Xiamen Unitex Trade Co., Ltd. — OEM & ODM underwear sourcing partner
| Supplier | Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — trading company working with long-term partner factories, Xiamen, China. |
|---|---|
| Minimum order | 2,000 pieces per style and colour on selected fabrics and constructions |
| Fabrics | Cotton single jersey, cotton/elastane, cotton rib, micro-modal and viscose blends |
| Construction points | Waistband height, leg opening and rise, each specified in centimetres |
| Waistband | Type, tension at rest and extended, recovery after washing |
| Sizes | Destination market size table, calculated at each break |
| Lead time | Counter sample 7-10 days; bulk 45-60 days from sample approval and deposit |
| Fabric weight | Measured to ISO 3801 on the roll, cut-and-weigh, not from a mill swatch |
| Dimensional change | ISO 6330 washing procedure and ISO 5077 measurement, run on the roll and on the finished brief |
| Colour fastness | ISO 105-C06 to washing and ISO 105-E04 to perspiration, thresholds set in the specification |
| Waistband recovery | Recorded as a percentage of the original width after repeated extension |
| Pouch and rise measurement | Pouch depth, front rise and back rise on the order record, each with a millimetre tolerance |
Buyer checklist
- Waistband height written in centimetres, not as a style name
- Leg opening and rise specified separately from the name
- Waistband tension recorded at rest and extended
- Elastane percentage tied to the waistband requirement
- Size table set with the destination market limits and tolerances
- Approved counter sample signed by both sides and kept as the reference
- Care and composition labelling checked against the destination market
- Colour fastness to perspiration to ISO 105-E04 written into the test plan, because a brief fails in the market rather than on the table.
Unitex Underwear (Xiamen Unitex Trade Co., Ltd.)
Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.
