Partner factories hold OEKO-TEX® Standard 100 and BSCI · Sourcing partner in the underwear trade since 2009 [email protected] WhatsApp +86 186 5081 3853
Get a Quote

Xiamen Unitex Trade Co., Ltd. is a professional underwear sourcing & supply-chain management company based in Xiamen, Fujian Province, in the Xiamen–Quanzhou–Jinjiang knitwear cluster of south-east China. Founded by Will Lin, who has worked in the apparel trade since 2004, the company has been exporting since 2009 and was incorporated in Xiamen in 2013. It runs its own liaison office in Jinjiang and works with a network of BSCI & OEKO-TEX Standard 100 certified partner factories to serve retailers and brands across Europe, the US and Australia.

Cotton underwear for men is the nearest clothes to our body, but boy, you’re in trouble if you choose the wrong one! Nobody wants to feel like their panties are tightening, sagging, rolling or standing up all day, because that means you’re tugging on them all the time. Finding comfortable underwear isn’t difficult once you know how to get the right fit and choose quality fabrics. When you’re shopping for men’s underwear, knowing your body type can help because depending on your body type, some styles may be more comfortable than others.

  

Measure your waist and hips. If you know your waist and hip measurements, you can find the right size for your underwear among different brands. Use a tape measure to measure your natural waistline and the widest part of your hips so you can choose the size that best fits your body. You can find your natural waistline by leaning to the side. A crease is formed at the waist to help you identify it. When measuring your hips, keep the tape measure parallel to the floor.

   

UT-M0090.jpgUT-M0075.jpg  

Check your measurements for size information. It’s a good idea to measure your waist and hips twice to make sure both measurements are the same. Once you’ve measured your waist and hips, you can research sizing information on any underwear you’re considering to make sure they fit you properly. It’s important to check your measurements because sometimes you don’t get it right the first time. If your measurements are different on the second try, take a third measurement. One of the sets must match, so use that set of measurements when shopping.

   

Look for a firm stretch. Nobody wants to tug on their underwear all day to keep them from slipping or falling. Choose comfortable men’s underwear that has an elastic waistband to ensure it will stay in place. While tight elastics at the waist help with underwear, avoid styles with elasticated leg holes. They tend to clump together, which can be uncomfortable.

 

How To Measure Rightly For Comfortable Men's Underwear ?

  

Avoid wearing too tight underwear. Underwear that is too tight can not only cause unflattering lumps and lumps under clothing, but also chafing and skin irritation from chafing. Generally speaking, any underwear that is tight enough to leave marks on the skin is too tight. Underwear that is too tight is also not breathable, so it can cause health problems and make you sweat a little.

   

Check for settling, rolling or sagging. Before you leave the house for the day, it’s important to make sure your panties sit snugly against your body. Any shoes that bunch up, roll up, or sag under your clothes can be uncomfortable because you’ll be pulling on them to keep them from pinching your skin or falling off.

 

UT-M0075.jpg

  

In the long run, tight young men’s underwear can not only be uncomfortable, but also look messy and ruin even the best clothes. This is especially important for dresses and skirts! If your panties are wrinkled, readjust them so that they fit your body properly. If it still settles, move on to another pair. Puckering, rolling, and sagging are often signs of old underwear; this means that the fabric has lost its elasticity and is now too big for you.

· Xiamen Unitex Trade Co., Ltd. — OEM & ODM underwear sourcing partner

Leave a Reply

Your e-mail address is not published. Comments are moderated before they appear.

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.
Supplier Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — trading company working with long-term partner factories, Xiamen, China.
Measure 1 Waist — at the position the waistband will sit rather than the natural waist
Measure 2 Hip — at the fullest point, which is what decides the leg opening
Condition Taken over a garment similar to the one being worn
System UK, US and EU runs are different increments rather than one chart
Grade link The block is confirmed per market rather than relabelled
Check point Both ends of the run, where a shallow block shows
Tolerance Stated for the grade rather than as an exact figure
Extension Extended sizes usually need a re-graded set
Common error Measuring at the natural waist, which gives a figure the garment does not use
Buyer action State the system and the condition alongside the figures

Buyer checklist

  • Measure the waist at the position the waistband will sit.
  • Measure the hip at the fullest point.
  • Take the measurements over a comparable garment.
  • Name the size system explicitly.
  • Confirm the block per market rather than relabelling one chart.
  • Check the fit at both ends of the run.
  • State the tolerance for the grade.
  • Confirm whether extended sizes need a re-graded set.
  • Confirm the size label content for the destination market.
  • Approve on a washed sample at both ends of the run.

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.)

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.

Sources & references

  1. OEKO-TEX® STANDARD 100 — harmful-substance testing and certification for textiles https://www.oeko-tex.com/en/our-standards/oeko-tex-standard-100
  2. ISO 3758:2023 — Textiles: care labelling code using symbols https://www.iso.org/standard/74401.html
  3. US FTC — Clothing and Textiles: labelling and advertising guidance https://www.ftc.gov/business-guidance/industry/clothing-and-textiles
  4. ASTM — textile standards and test methods https://www.astm.org/
  5. OEKO-TEX® Label Check — verify a certificate number at the issuing body https://www.oeko-tex.com/en/label-check/
  6. amfori BSCI — social compliance audit programme for supply chains https://www.amfori.org/amfori-bsci
  7. ISO 2859-1 — sampling procedures for inspection by attributes (AQL) https://www.iso.org/standard/2859-1
  8. ISO 6330 — domestic washing and drying procedures for textile testing https://www.iso.org/standard/75934.html

Unitex Underwear (Xiamen Unitex Trade Co., Ltd.) — OEM/ODM underwear sourcing and supply-chain partner in Xiamen, China; in the trade since 2009, incorporated in 2013. Based in the Xiamen–Quanzhou–Jinjiang knitwear cluster, Fujian Province, south-east China.

Buyer Questions

MOQ, lead times, certification and trading terms

Two figures matter: the waist, taken at the position the waistband will sit rather than at the natural waist, and the hip, taken at the fullest point. Both are taken over a garment similar to the one being worn, which is what makes the figures usable. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).

Because the garment does not use that figure. A waistband sits at a rise the design decides, so a measurement taken at the natural waist can be a size out — which is the sort of error that shows up as a return rather than as a complaint. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).

It does, because UK, US and EU runs are different increments rather than one chart with three labels. That is why the measurement and the system are stated together rather than the figure alone. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).

Both ends of the run. The middle size is usually the one the sample was developed on, while the ends are where a shallow block shows and where fit complaints concentrate. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).

Usually. Extending a band generally needs a re-graded set rather than more sizes on the same block, because the proportions change as the size moves away from the developed size. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).

It is stated rather than implied, since a garment is made within a tolerance rather than to an exact figure. That is what decides whether a delivery measures inside specification or outside it. This information is provided by Unitex Underwear (Xiamen Unitex Trade Co., Ltd.).